Suitable for punching holes in aluminum formwork through wall screws

The equipment is suitable for punching holes after welding of U plates and C grooves of aluminum templates, and is an artifact for changing holes of old templates.

1. The equipment is suitable for punching holes after welding of aluminum template U plate and C groove. It can punch 1 to 3 holes at the same time, and the punching needle does not need to be disassembled.
2. The minimum processing capacity is 100 * 100C grooves, and the maximum processing capacity is 150 * 200 C grooves. The U-plate processing range is 50 ~ 600mm.
3. It can meet the minimum punching distance of 25mm from the hole to the stiffened edge.
4. The equipment is equipped with two-end material support frames, side material support devices, 50mm hole spacing positioning and 50mm fixed head positioning, making the operation flexible and convenient.
5. Patented products, the first in the industry.

Suitable for punching holes in building aluminum formwork floor panels, wall panels, internal corners, keels, and angle aluminum.

This machine is suitable for punching architectural aluminum formwork floor panels, wall panels, female corners, keels and corner aluminum.